Cheap
Windows.

Measure and plan the job

Convert window dimensions to millimetres

One inch equals 25.4 millimetres. Convert the measurements themselves and keep the original reading visible in the request.

Convert the measurement as recorded

Multiply inches by 25.4 to convert to millimetres. If the tape shows inches and a fraction, first combine them into a decimal number or fraction. For example, 35 and three quarters inches is 35.75 inches, which equals 908.05 millimetres. To go the other way, divide millimetres by 25.4. Calculate width and height separately and label both.

If you measure directly in millimetres, keep that reading before converting it for comparison. Rounding a conversion to a whole inch or whole centimetre can turn a close listing into what appears to be an exact match.

  • Write each pair as width x height followed by in or mm.
  • Keep enough precision to identify the closest candidate and leave the exact fit decision to the confirmed measurements.

Convert all readings from an uneven opening

If different places along the opening give different dimensions, convert each reading rather than choosing an average. Identify whether the numbers describe the unit, exposed framing or the space inside the installed frame. A precise conversion cannot reconcile a rough opening measurement with a window unit dimension.