Read the marks between whole inches
Use a legible tape and look straight at the mark where it meets the measuring edge. A half inch is halfway between labelled inches. A quarter is halfway between the whole inch and half inch. Depending on the tape, smaller marks may indicate eighths or sixteenths. '36 3/8 in' records 36 whole inches plus three eighths. The decimal form is 36.375 inches, which is different from 36.38 after rounding.
Check the same dimension a second time if the mark is difficult to read. Keep the tape straight across the opening with a clear end point. A photograph of the tape and both edges, or a note describing the measuring faces, makes an unusual fraction easier to interpret.
- Use a space between the whole number and fraction, as in 36 3/8.
- Keep width and height as separate values.
Keep the measuring reference
Write what the reading describes, such as the width inside the visible frame. If the finder offers inches and millimetres, use the unit of the original tape or convert both dimensions together. Do not submit one number in inches and the other in millimetres under a single unit label.