Measure across and then up
Take the width across the opening near the top, middle and bottom. Keep the tape level across corresponding faces. Take the height from the same kind of sill surface to the top at the left, centre and right. Measure whatever is accessible from a safe position. If a window covering prevents a direct line, note it rather than following the bend in the tape.
Say whether you measured between visible jambs, around the existing frame or between exposed framing members. These numbers describe different parts. Keep the original units and fractions and write down each reading. An average can conceal a narrow spot.
- Record width first and height second.
- Label readings that are approximate or obstructed.
Use the numbers to ask about fit
Compare the recorded dimensions with the listing using the same size basis. If the listing uses the outside window unit size and yours is a rough opening, ask what opening the exact unit requires. Include a wide picture and one of the sill. Have the final fit confirmed before ordering or removing the existing window.