Choose a window
Compare how windows open, where they fit and which glass and hardware details to check.
- When a Fixed Window Makes Sense
Decide where a fixed window suits the room by comparing the clear view, ventilation elsewhere and access for cleaning the outside glass.
- Casement Windows: Check the Crank and Swing
Choose a casement by checking hinge side, crank access, exterior swing and screen removal from the position where you actually use it.
- Is an Awning Window Right for the Opening?
Consider a top-hinged awning window by checking the space below its sash, the reachable controls and its position above a counter or ledge.
- Which Side Should a Single Slider Open On?
Pick a single slider by marking the moving sash, locating the lock and checking how the open side and screen work with the room.
- What to Look For in a Double Slider Window
Compare double sliders by how each sash moves, where screens cover the opening, lock position and which panels can be removed for cleaning.
- Buying a Single-Hung Window
Choose a single-hung window by checking how the lower sash lifts, where the lock sits and how the upper glass can be cleaned.
- Will You Use Both Sashes of a Double-Hung Window?
Evaluate double-hung windows by trying upper and lower sash operation, checking tilt clearance and confirming screen coverage.
- Casement or Slider? Compare the Moving Parts
Compare a casement and a sliding window by space outside, reach to the hardware, usable opening, screen and cleaning access.
- Double-Pane vs. Triple-Pane Window Glass
Compare window glazing by the complete assembly, light, spacer and frame details before choosing between double-pane and triple-pane glass.
- What to Compare on Low-E Window Glass
Read a low-E window specification using heat loss, solar gain and visible light figures, and check what the coating looks like in your room.
- Choose Privacy Glass by Testing the View
Test frosted, textured or obscured window glass from inside and outside before choosing the pattern and position for a private room.
- Tempered and Laminated Window Glass Explained
Understand how tempered and laminated glass differ, and what paperwork to check when a project calls for a specific glazing type.
- How to Shop for a Quieter Window
Work out where noise gets through and compare sound data for complete window assemblies with the seals and glazing you intend to buy.
- Choosing a Kitchen Window Above the Sink
Pick a kitchen window you can open and clean from behind the sink without hitting the faucet, shade, shelves or outside walkway.
- A Bathroom Window That Gives You Privacy and Air
Select a bathroom window by testing privacy in evening light, checking ventilation access and confirming how the glass can be cleaned.
- What Matters Most in a Bedroom Window?
Choose a bedroom window around quiet, privacy, night-time controls and the practical way people open and use it from inside.
- Choose a Basement Window That Can Actually Open
Check how a basement window moves beside the well, landscaping and inside ceiling before choosing a slider, hinged or fixed configuration.
- Plan a Living Room Window Around the View
Compare fixed and operating panes for a living room by studying sightlines, moving sash positions and where you need fresh air.
- Window Glare in a Home Office: What to Choose
Use monitor glare, time of day and shade access to choose glazing and window operation for a home office or study space.
- Check Screens and Cleaning Access Before Buying
Compare window screens and cleaning access by finding the catches, testing sash release and checking where you can reach the outside glass.
- Vinyl, Wood or Aluminum Window Frames?
Compare window frame materials using upkeep instructions, interior and exterior finishes, sightlines and the actual assembly specification.
- How to Read a Window Specification Sheet
Match a window specification to the exact operation, glass and frame you are choosing, then compare documented values on the same basis.
- Compare Window Quotes One Opening at a Time
Read window quotes line by line to spot differences in glass, operating panels, finishes, screens and what each package includes.
Measure and plan the job
Record the opening, check a close match and plan pickup, delivery or installation.
- How to measure a window opening
Take repeatable width and height measurements for a window request and record which opening surfaces you measured.
- Window unit size vs. rough opening
Learn which measurements describe the complete window assembly and which describe the opening that receives it.
- How to measure an existing window frame
Measure the exposed edges of an installed window frame while keeping trim, glass and unit dimensions separate.
- Convert window dimensions to millimetres
Convert inches to millimetres for a window search while keeping the original precision and dimensional basis.
- How to read window measurements in fractions
Read and record common imperial tape fractions for a window inquiry without rounding the actual opening.
- How to measure an out-of-square window
Record differing widths, heights and diagonals before choosing a window for an opening that may be skewed.
- How to measure window opening depth
Measure the depth across the window opening and show interior and exterior finishes that affect where a unit can sit.
- How to measure a window sill
Record the sill surface, height reference and any visible slope or damage before a window replacement is sized.
- How to check a near-size window match
Compare a nearby listed size with your actual opening without treating a close measurement as proof of fit.
- Can you replace a window without removing the frame?
Check which measurements and condition details matter when you want to keep the existing window frame.
- How to measure for full-frame window replacement
Collect the visible opening, wall depth and surrounding finish details needed to assess a full-frame replacement.
- How to measure a window when trim hides the framing
Collect a useful preliminary window measurement without assuming the casing reveals the true rough opening.
- How to measure multiple windows for a quote
Label and record each opening separately so a multi-window quote can match the right dimensions and photos to each room.
- How to check clearance around window trim
Record surrounding casing, blinds and nearby finish details before choosing a replacement that needs to fit the same space.
- Measure a window before changing wall finishes
Document present and planned tile, drywall, cladding or sill changes so the replacement window can be sized at the right stage.
- Which photos help with window sizing?
Take useful photos of a window opening, frame edges and sill so a supplier can understand your measurement notes.
- How to check stock for an exact window size
Ask about the specific window variant, its measurement basis and current availability before arranging collection or delivery.
- How to prepare for window installation
Get the room, window openings and work scope ready for a planned window installation while the existing windows remain in place.
- How to check site access for window installation
Describe the route, work position and access permissions an installer needs to assess a window job.
- How to plan a window delivery that may need a lift
Gather route and building details so a delivery provider can assess whether specialist lifting is needed.
- How to prepare for window delivery
Confirm identification, packaging and the agreed drop-off point before arranging delivery of a window.
- How to prepare to pick up a window
Check the package, vehicle access and handling instructions before collecting a window that has been confirmed available.
- What to send in a window size request
Send a window size request that keeps your opening dimensions, measurement basis and preferred candidate clear.