Cheap
Windows.

Measure and plan the job

How to measure window opening depth

Depth goes from the interior toward the exterior. It helps explain how the window meets the wall, finishes and planned trim.

Choose points on the same cross-section

Look along a side of the opening and identify the interior and exterior reference surfaces you can safely see. Record the distance between them. If a return or jamb extension continues toward the room, label its depth separately instead of counting it as part of the main frame without checking. A side photo makes the step between the different materials easier to understand.

Depth can vary near the top or sill. Check more than one position where accessible. If exterior trim hides the usable support surface, note what you measured and where the tape stopped rather than taking the visible trim thickness as the full wall depth.

Explain where the finished surfaces should land

Tell the installer whether the inside finish, cladding or sill is changing. Ask which frame reference points the manufacturer's depth uses and whether the quoted work includes extensions or returns. A window can match width and height while still needing a different depth detail.

  • Label the inside and outside of each side photo.
  • Record existing finishes separately from proposed finishes.
  • Compare differences by location rather than taking an average.