Cheap
Windows.

Measure and plan the job

How to measure an out-of-square window

If an opening looks uneven, preserve the measurements from different positions so an installer can see where the variation occurs.

Measure matched faces and corners

Measure the top, middle and bottom widths between the same kinds of faces on each side. Record the height at the left, centre and right, starting from a consistent sill reference. If you can reach the corresponding corners from a safe position, measure both diagonals. Different diagonal readings are a useful flag, but they do not explain whether the existing frame, wall opening or finish is responsible.

If you can see only the installed frame, label it that way. A picture with the window closed can show a noticeably different gap at two corners. Add a second photo of any place that binds, looks damaged or has trim that covers a measuring edge.

Keep the readings separate

Send the range and the locations. Avoid averaging the measurements or choosing a smaller stock window based only on the smallest number. The installer needs to check what can accommodate the new unit and whether the surrounding work will change the useable opening.

  • Mark each diagonal with its two corner positions.
  • Say whether the frame is staying or the whole opening will be checked.